60LEDs per Meter 3528 RGB LED Strip Light 12Volts

Product Features

1. High quality highlight smart chip. The advantages of small power consumption, low heat, no glare, impact resistance etc. Low voltage DC12V power supply, high safety and reliability.

2. High transparent green soft rubber, high light transmittance, green environmental protection.

3. Colorful variety can be adjusted by the controller according to the customer’s requirement.

4. IP65 glue waterproof and moistureproof, fully adapted to the various indoor environment (long time in water to use is not recommended)

5. Pure copper plate, electrical conductivity, stronger antioxidant capacity, longer lifespan and more stable.

6. Strongly softness materials which can be arbitrarily curved. To avoid the lamp with broken, deformation and sealing-off issue.

7. Packaging: 5 m/roll, 3M glue at the back of lamp strip, electrostatic bag packaging.

8. Convenient and freedom cutting and welding: each group of LED can form a loop, can be arbitrary along the tangent truncation and welding meet customer requirements of various light length needs light, thin, fit in narrow space installation.

9. Can match 24 keys or 44 keys remote controller and constant current power supply.

Specifications Datasheet

Control Theory

An IC control three LEDs to form a loop (a group), the controller through the inside of the control IC for FPCB to control circuit, so as to control LED lights change different effects, such as flashing, chase and jump, monkey clockwise and anticlockwise monkey, monochromatic monkey, monkey discoloration, single chase from beginning to end, flowing water, simulation of lightning etc. The article lamp’s changing effect is not limited to the current controller built-in 94 kinds of effect, can according to customer needs to write. Line screen can display, in the form of words, letters, pictures, animations and so on.

Product Installation & Attention

1. Indoor installation: LED strip light for indoor installation is simple, since haven’t to withstand the wind and rain. Installation can go directly to tear light bar on the back of 3m double-sided adhesive on the surface of the sticker, then a fixed in the place where you need to install the lamp according to the flat. If there is any corner or article lamp is too long or too short, LED strip light can be brought in each group with scissors logo tangent place any cutting or welding used alone.

2. Outdoor installation: outdoor installation due to withstand the wind rain, can't use 3 m glue fixed, therefore often adopt the way of card slot fixed outdoor installation, need to cut and connection, methods as well as indoor installation, just need additionally equipped with waterproof glue, in order to consolidate the join waterproof effect.

3. Power supply according to the size of the LED strip light power and connection length.

4. Controller connection way: the LED strip with entertaining diversions and RGB strip lights need to use the controller to achieve change effect, and each of the controller controls different distance, in general, a simple controller control distance for 10 to 15 meters, remote controller to control a distance of 15 to 20 meters, the longest can control to 30 meters distance. If the LED strip with the connection of the distance is longer, and the controller can't control so long LED strip, then will need to use high power amplifier for tapping.

Main Application Areas

1. Cities outline (building surroundings, wall advertising, signs, Christmas landscape decoration).

2. Decoration of irregular design body (hotel/club/KTV polygon of the place such as wall, water droplets and groove design etc).

3. Household dark slot edge (door frame, bar, wine cabinet, wardrobe, TV cabinet etc).

4. Car beauty (car body and car bottom etc).